door lock wiring, 2008 infiniti g35

Hi, I try to wire the alarm for 2008 infiniti g35. What are color wire for lock and unlock and where exactly they located?. My alarm can hook up the (-) or (+) input for door lock/unlock .Thankshhh

www.idatalink.ca or www.ifar.ca On either site, select your type of car, and then they'll offer products for sale. At that point, you'll be able to look at the installation manual. (You don't have to buy the product.) Both companies' manuals show where there are two empty pins at the BCM in the passenger kick panel, and you can insert wires there to control the locks.

yes, I tried that already, but after half hour or so . When you disarm vehicle the door will not unlock. Someone told me that the BCM will put to sleep after certain time.hhh

double pulse to unlock, single pulse disarms. also i havent heard of the infinity BCM going to sleep, only know of this on GM vehicles.

could someone provides me the color wire chart for infiniti 2008 g35 please ? .Thankshhh

I've always 5 wired the Nissan products - I've never been comfortable sticking wires in open pins on the BCM.

Lock should be purple at BCM

Drivers unlock should be green at BCMPassengers unlock should be violet at BCM

These are the actual actuator wires and can be metered when locking/unlocking the doors from any source.  You wil need a relay for each wire.

I know others have had great success with the empty pins, but I just don't personally like it.

Kevin Pierson

How do you use relay for these wire?. Are these all positive (+) wire ?. Thanks.hhh

How do you connect the lock/unlock wire by using the reverse polarity wire on this vehicle?.hhh