the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

starter kill wired correctly?

Home / the12volt's Install Bay / Car Security and Convenience / starter kill wired correctly? (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
w87will 
Copper - Posts: 52
Copper spacespace
Joined: February 18, 2008
Location: Florida, United States
Posted: March 06, 2008 at 9:34 PM / IP Logged  

Using a Viper 5900 in my 01 Grand Cherokee. I wired up the purple starter output wire AND the Green starter input both into the starter wire in my main harness near the key. Is this correct?

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 06, 2008 at 9:51 PM / IP Logged  
Don't forget to cut the starter wire between those two.
w87will 
Copper - Posts: 52
Copper spacespace
Joined: February 18, 2008
Location: Florida, United States
Posted: March 06, 2008 at 10:05 PM / IP Logged  
Oh so I would just cut the starter wire in two and have the purple on one side and the green wire on the other? Which is what they meant by starter and key side?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 06, 2008 at 10:07 PM / IP Logged  
You got it.... starter kill wired correctly? - Last Post -- posted image.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 07, 2008 at 5:15 AM / IP Logged  
The diagramme says you must do it so why not follow it?
w87will 
Copper - Posts: 52
Copper spacespace
Joined: February 18, 2008
Location: Florida, United States
Posted: March 07, 2008 at 8:16 AM / IP Logged  
I didnt see any diagrams for it. I was under the impression I was to connect both wires together to the starter wire. But now I understand and it makes sense, lol.  I appretiate your help, thanks alot.
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: March 08, 2008 at 4:58 PM / IP Logged  
Also will, make sure the purple is going toward the starter motor and the green is towards the ignition switch...otherwise the remote start won't work.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
w87will 
Copper - Posts: 52
Copper spacespace
Joined: February 18, 2008
Location: Florida, United States
Posted: March 08, 2008 at 6:05 PM / IP Logged  
Awesome. thanks alot for the help. 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer