fleece, speaker rings securing

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / fleece, speaker rings securing (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rc26142

Member - Posts: 18

Joined: November 30, 2003

Location: California, United States

Posted: March 14, 2008 at 3:01 PM / IP Logged

Hello,

First Time making a fiberglass box, Already got the the skeleton done and the rings for the subs in the correct position. Ready to apply the fleece material over the whole project. Question i have is, the fleece over the speaker rings. do i need to secure it to the rings? if so any recommendations..This sounds confusing Any help would be apprecitive.

Thanks

Ron

Back to Top

malibudee

Member - Posts: 6

Joined: April 27, 2007

Location: United States

Posted: March 15, 2008 at 3:58 AM / IP Logged

Yes so that you can get a tight fit ... Just staple or glue the fleece to the inside of the speaker ring then hit it with the resin but you don't need to resin where the speaker goes just where the speaker ring and fleece meet so that is easier to cut out ..... hope that helps if not then just look around the forum help me out alot

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fleece, speaker rings securing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.