security for tool box?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / security for tool box? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

standbackimapro

Member - Posts: 43

Joined: November 23, 2005

Location: United States

Posted: March 14, 2008 at 7:33 PM / IP Logged

I wanted to make a Small security setup for my tool box..

Nothing insane, i was thinking about using 2 Mecury switches have one one way, and one another way, so when the lid is closed the LED will flash, and if you open it, the led stops flashing, but a siren goes off.. like a small alarm from radioshack...

Im just not sure how i can make an LED flash, Or have a siren make noise.... i can only make a siren stay on, like no siren noise, just a constant eeeeeeeeeeeeeeeeeeeeeeeeeee

Back to Top

Search for other posts by standbackimapro

ya boy mike

Member - Posts: 44

Joined: October 11, 2007

Location: Tennessee, United States

Posted: March 14, 2008 at 10:16 PM / IP Logged

I have done it before messing around with people. Just use a hoodpin switch in line with either of the wires for the siren, and run them directly to a drill battery. This really only worked, however, because the guys box that we did it too was a snap on box that had the opening top, which had to be open in order to open the drawers. So as soon as he wanted to get in to his box, he had to open that top part, and the siren would go off.

We didnt get any further than that tho, no led or anything like that, we just wanted to mess with him really, but it worked.

It Hz

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 16, 2008 at 8:32 PM / IP Logged

i remeber you started a thread about this. I replied with a diagram, but u never replied again. well lookin at your old thread, the diagram i drew at the bottom works.

https://www.the12volt.com/installbay/forum_posts.asp?tid=99252&KW=tool+box

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

security for tool box?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.