viper 5700 stopped chirping?

Home / the12volt's Install Bay / Car Security and Convenience / viper 5700 stopped chirping? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

m2736185

Member - Posts: 45

Joined: October 30, 2006

Location: United States

Posted: March 20, 2008 at 1:34 AM / IP Logged

I have a Viper 5700 installed in my 2000 Neon. All of a sudden the status LED has been on constant instead of blinking and it no longer chirps on either the car or the remote. And yes the siren still works. I didnt even think this setting could be changed. Any ideas?

Back to Top

gottspeed

Member - Posts: 13

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 15, 2008

Posted: March 20, 2008 at 8:36 AM / IP Logged

Sounds like valet mode is on. Your manual will tell you how to get out of it.

I think its open door, turn ignition on then off, and hold valet button. I forget though.

Back to Top

gottspeed

Member - Posts: 13

Joined: March 15, 2008

Posted: March 20, 2008 at 8:39 AM / IP Logged

Yeah you'll have to check the manual, it involves the remote, unlock, lock, unlock after door open, ignition cycle.

Look it up, I just did it yesterday and I still can't remember.

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: March 20, 2008 at 9:33 AM / IP Logged

2 ways to do it

1) by remote---- open door hit lock then unlock then lock again

2) by key turn key to ign then back off then hit valet button once this needs to be done in less then 10 sec but dotn go to fast

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5700 stopped chirping?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.