the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cifford 50.5x sensor layout am i correct?


Post ReplyPost New Topic
< Prev Topic Next Topic >
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: March 30, 2008 at 5:15 AM / IP Logged  
Okay on the 50.5x that i am installing on my Milan it has a shock sensor port,violet(+)door trigger input,blue(-)trunk trigger input,green(-)door trigger input and gray(-)hoodpin shutdown input.The extras i'm going to use are a radar sensor(au94t),tilt sensor(507M),and a battery backup(520T).I'm not using the shock sensor that comes with it.My Milan has (+)door trigger/dome supervision which dei says to just use the dome super wire.So that leaves me with the (-) door trigger,trunk trigger,and hood trigger.I've drawn up my layout as such,
AU94T-plug into shock sensor port(just have to reverse blue and green on sensor side plug as crimeguard is opposite of dei.)
507M-Blue(-)trigger from here to Green(-)trigger since not being used.
520T-Blue from here to Gray(-)hoodpin wire,(Diode isolated)since this will also be feed from my hoodpin.I will do a Y diode setup so that one end is the hood wire and the other the 520T trigger wire going into one wire(gray wire from alarm) with bands facing the sensor sides.
"ole blake"
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: March 31, 2008 at 1:16 PM / IP Logged  
Can anyone confirm this layout for me?
"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 24, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer