the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Grand AM Door locks

Home / the12volt's Install Bay / Car Security and Convenience / 2002 Grand AM Door locks (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 08, 2003 at 7:28 AM / IP Logged  
Ypu alarm probably designed to just trigger relays. All of the units i install have relayed or higher current outputs already so I can get away with only one relay or none on the relayed units.
Use another relay for unlock. Wire it the same way as lock but with out the resistor.
J Rilla
Owner/Installer
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 08, 2003 at 7:35 AM / IP Logged  
Don't you mean that you need the resistor on the UNLOCK wire and no resistor on the LOCK wire ? The UNLOCK wire requires a 1.5K ohm resistor on pin 30 going to the WHITE wire.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 08, 2003 at 7:43 AM / IP Logged  
lol, Jeff you should look at my diagram. I must have set it up for those cars that only unlock.
J Rilla
Owner/Installer
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 08, 2003 at 8:01 AM / IP Logged  
LOL !! Oopps, yeah, looks like anyone who owns a Grand Am has to use their keys to LOCK the doors 2002 Grand AM Door locks - Page 2 - Last Post -- posted image. 
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
oolowrideoo 
Member - Posts: 26
Member spacespace
Joined: March 04, 2003
Location: United States
Posted: March 08, 2003 at 8:06 AM / IP Logged  
I have a relay on the unlock, but not on the lock. The lock works fine. I'm wondering what kind of output I should be getting from the unlock after the resistor. I'm still reading -12volts?
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 08, 2003 at 8:09 AM / IP Logged  
Oh I see. Um your output needs to be negative. What size resistor did you use?
J Rilla
Owner/Installer
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 08, 2003 at 8:10 AM / IP Logged  
I dont know whay I couldnt edit my last post to add this, but: Make sure you set up the relay like I have diagramed (well except for the double unlock thing, i am going to go fix that now)
J Rilla
Owner/Installer
oolowrideoo 
Member - Posts: 26
Member spacespace
Joined: March 04, 2003
Location: United States
Posted: March 08, 2003 at 9:53 AM / IP Logged  
The resistor I'm using measures to about 1.47 Kohms, and yes the output is a ground.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 08, 2003 at 9:54 AM / IP Logged  
Does the relay click when you press the unlock button?
J Rilla
Owner/Installer
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer