wiring 520t

Home / the12volt's Install Bay / Car Security and Convenience / wiring 520t (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rt4x4

Copper - Posts: 107

Joined: November 28, 2006

Posted: May 22, 2008 at 4:08 PM / IP Logged

I am gouing to hook up a 520t BUB to my clifford 50.5x and was wanting to know what trigger to hook it up to,I am using my hood and trunk inputs,can you use the blue wire on the shock sensor or would it be better to hook it to the hood or trunk trigger and diode isolate, if so which way would the diodes go?

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: May 22, 2008 at 6:57 PM / IP Logged

Blue wire in the shock sensor harness will be fine. It will show up as sensor 2 on the remote.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring 520t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.