clifford arrow 3 remote programming

Home / the12volt's Install Bay / Car Security and Convenience / clifford arrow 3 remote programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Epa570

Member - Posts: 3

Joined: August 24, 2002

Location: United States

Posted: June 01, 2008 at 1:28 PM / IP Logged

Hi all,

I have a quick question. I am trying to program an addtional remote to the alarm and it seems to not like the remote. The remote I got looks like the same remote that works but I cant figure out what the deal is. I turn the key on.. hit my my valet code and hold down (star). The I hold down blank it beeps and then hit star and it beeps. I hit the remote button , it beeps and then I hit the button again and it beeps twice....then beeps 3 times and the remote wont program. I dont see why it wont let me use this remote.

Thanks for any ideas or help

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 01, 2008 at 4:33 PM / IP Logged

The Cello type from the Arrow 5 is not the same as the one on the 3 as far as I believe, that might be your problem.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford arrow 3 remote programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.