2005 chevy cobalt starter wire, info

Ok I read every post here on the 05 cobalt having PK3 passkey 3 system and it's procedures on using an adapter for remote start. However this is my problem. I DO NOT HAVE THE PK3 system on my car. There is no pk3 on the key and there is no white or white black wires at my keys ignition. My car is the lowest of the low model. No power door locks or windows. No premium stereo. So here lies my question. What color and where is the starter wire nedded to do a remote start on this vehicle?. Thanx Much

there probably isn't one.. the car cranks when it sees Acc drop out.....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Theres gotta be some solution.

Try looking at the PLJX at bypasskit.com I'm looking at the install manual and it say it works on the 05 cobalt. If you have the WHITE/ blue wire at the ign.cylinder.well?

big sexy lac wrote: Try looking at the PLJX at bypasskit.com I'm looking at the install manual and it say it works on the 05 cobalt. If you have the WHITE/ blue wire at the ign.cylinder.

PLJX is an auto learning override module designed to bypass all GM vehicles equipped with Passlock I , Passlock II, VATS & the new style PAsslock found in the Saturn Ion, GM Canyon, Colorado, Cobalt, Pursuit. **Replaces PLXR**. I DO NOT HAVE PASSLOCK OR ASSKEY OR VATS. This is the base model and no security whatsoever. Thanx for the site tho' Still need the starter wire? :(

I think the SIM-GM is what i need. Take a look at that part on that site. It says its a module for cars that do not have the starter wire or passlock !!...

Ok I will look tomorrow on my tech sheet I thought it said something about it being some where by the fender under the hood I just took a quick look I tried to post it but I could not so if the tech sheet will help you give me an email that I can send it to.well?

Dragorus wrote: I think the SIM-GM is what i need. Take a look at that part on that site. It says its a module for cars that do not have the starter wire or passlock !!...

the sim-gm is just a starter disable it is not used for remote start. it cranks when it sees ignition and acc drops out like "kgerry" said

hydroz_23 wrote: Dragorus wrote: I think the SIM-GM is what i need. Take a look at that part on that site. It says its a module for cars that do not have the starter wire or passlock !!... the sim-gm is just a starter disable it is not used for remote start. it cranks when it sees ignition and acc drops out like "kgerry" said

Exactly. You simply don't connect the starter wire and when the car sees ignition on and accessory gone it knows to crank...

Mike M2

Tech Manager

CS Dealer Services

Mike M2 wrote: hydroz_23 wrote: Dragorus wrote: I think the SIM-GM is what i need. Take a look at that part on that site. It says its a module for cars that do not have the starter wire or passlock !!... the sim-gm is just a starter disable it is not used for remote start. it cranks when it sees ignition and acc drops out like "kgerry" said Exactly. You simply don't connect the starter wire and when the car sees ignition on and accessory gone it knows to crank...

Ok I'll try to hook it up like this and use a true tach signal not volt. sense. Then i'll post my findings. Sounds like it would work tho'