the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

creating box for alpine type r 12


Post ReplyPost New Topic
< Prev Topic Next Topic >
darkmaniac7 
Member - Posts: 9
Member spacespace
Joined: June 14, 2008
Location: Texas, United States
Posted: June 20, 2008 at 12:19 PM / IP Logged  
aznboi3644 wrote:
darkmaniac7 wrote:
is that what you needed or not?
yes its what I needed...I work from morning till sundown so I don't get much time...but I'll have your design up by the end of the weekend
awesome thanks! i was just amking sure thats what you needed and that i didnt screw up the measurements :D
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: June 22, 2008 at 12:17 PM / IP Logged  
Here you go. The enclosure is 2.25 cu ft tuned to 40Hz.
The sub will still play down to 30hz...You should like it.
Set the subsonic filter at 30Hz
creating box for alpine type r 12 - Page 2 -- posted image.
creating box for alpine type r 12 - Page 2 -- posted image.
darkmaniac7 
Member - Posts: 9
Member spacespace
Joined: June 14, 2008
Location: Texas, United States
Posted: June 23, 2008 at 1:49 AM / IP Logged  
NICE! i really appreciate this man, I have one other question not in regard to box specs but i was wondering, we were going to put a small strip of plexiglas in the center and a red LED strip...would or doing any of this mess with the sound of the box, and if you were to do this how would you get it to activate off sound? and also what should i tap into to power it up? thanks again man this is awesome!
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: June 23, 2008 at 3:34 AM / IP Logged  
Are you wanting to put the plexi on the top???
darkmaniac7 
Member - Posts: 9
Member spacespace
Joined: June 14, 2008
Location: Texas, United States
Posted: June 23, 2008 at 12:42 PM / IP Logged  
yes but like i said not the whole top but only a small strip so it shouldnt rattle near as much,
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: June 23, 2008 at 9:04 PM / IP Logged  
well you'll have to add a mount for the plexi...the plexi should not be thin flimsy cheap crap
darkmaniac7 
Member - Posts: 9
Member spacespace
Joined: June 14, 2008
Location: Texas, United States
Posted: June 23, 2008 at 9:41 PM / IP Logged  
yea i got the mount and everything and bought .55 in. thick plexi from lowes. i figured that should be thick enough. also how would yo uwire a neon and ground it out? i think it has a built in relay for sound activated etc. and its 12v. how would I wire it up properly.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer