the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 chevy venture


Post ReplyPost New Topic
< Prev Topic Next Topic >
camino 
Copper - Posts: 54
Copper spacespace
Joined: October 15, 2002
Location: Mexico
Posted: March 09, 2003 at 2:07 AM / IP Logged  
yes he is rigth and i think is better to dollow his words
if you need the complete paper work let us know
alfred 
Member - Posts: 24
Member spacespace
Joined: March 08, 2003
Location: United States
Posted: March 09, 2003 at 9:40 AM / IP Logged  
 i have an audiovox remote start i have installed it in a 2003 venture the remote start will only work when the key is turned slighty foward not to the run position but just till you see the p on the shifter light then it will work fine.
alfs
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 09, 2003 at 3:37 PM / IP Logged  
You need to get your bypass module installed.
I have a 2001 Venture and I did not use a keysense wire to shutoff the bypass module and everything is fine. I used the PKG5 though.
J Rilla
Owner/Installer
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 09, 2003 at 4:28 PM / IP Logged  
Hey Alfs, email me your email addy & I'll send you all the necessary files for the install if you haven't already got them from another member.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
alfred 
Member - Posts: 24
Member spacespace
Joined: March 08, 2003
Location: United States
Posted: March 09, 2003 at 6:15 PM / IP Logged  
couple of things should i install a relay between the key module and ignition switch if so how to wire. the other problem is the remote start will only work when i turn the key up just enough to turn on the p on the shifter i dont have to go all the way to the run position is there another wire a third ignition wire i should look for i have not hooked the key module in yet but do leave the key in the ignition when i try to use the remote start
alfs
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 09, 2003 at 6:39 PM / IP Logged  
I assume that you did not install ther bypass yet but please correct me if you have.
Just install the bypass without a relay and get back to us.
I assume that you have to turn the key a little so that the car tries to read the if there is a key in the ignition. That is a little wierd though because most vehicles you only need to insert it into the cylinder and not turn it at all.
J Rilla
Owner/Installer
alfred 
Member - Posts: 24
Member spacespace
Joined: March 08, 2003
Location: United States
Posted: March 11, 2003 at 4:12 PM / IP Logged  
i installed the key bypass and the remote start will still not work unless the key is turned just a little bit not all the way to run just a litte bit there must be another ignition wire all acc. turn on sounds like fuel pump engages but the shifter letters never light up which is what happens when i turn the key a little bit and the remote start works
alfs
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 11, 2003 at 4:14 PM / IP Logged  
what wires do you have powered in the ignition harness?
J Rilla
Owner/Installer
alfred 
Member - Posts: 24
Member spacespace
Joined: March 08, 2003
Location: United States
Posted: March 11, 2003 at 4:26 PM / IP Logged  
i have  the red w/white treacer to to red wire incar red wire to red red wire yellow wire to yellow wire blue wire ign 1 tothe pink in car green wire to the white in the car violet wire to the orange wire in the car
alfs
alfred 
Member - Posts: 24
Member spacespace
Joined: March 08, 2003
Location: United States
Posted: March 11, 2003 at 5:11 PM / IP Logged  
ther is one xtra wire in the harness it looks to be black it has power in the run, acc but not in the start position
alfs
Page of 4

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer