polk audio crossovers overheating during

Home / the12volt's Install Bay / Car Audio / polk audio crossovers overheating during (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

robsatx

Member - Posts: 9

Joined: July 06, 2008

Location: Texas, United States

Posted: July 07, 2008 at 3:35 PM / IP Logged

The plastic is melted on the back of the xover . . . the xovers seem really weak. The speakers appear to be fine if I move them to a different xover they sound fine. I know I read elsewhere someone else stated a similar issue.

r

Back to Top

audiocableguy

Copper - Posts: 630

Joined: January 27, 2003

Location: Idaho, United States

Posted: July 07, 2008 at 5:44 PM / IP Logged

The resistor could be replaced with a 20W if this is where the problem is. Looks like plenty of space available. It blows my mind seeing 5W and smaller on the Focal stuff.

Kicker had the ND-20 Tweeter Set back when. It had the light bulb protection circuit built into a resin sealed clear case. Many came back melted.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

polk audio crossovers overheating during

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.