the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

car stalls when driving


Post ReplyPost New Topic
< Prev Topic Next Topic >
bigcurt 
Member - Posts: 9
Member spacespace
Joined: July 14, 2008
Location: Michigan, United States
Posted: July 19, 2008 at 1:37 PM / IP Logged  
ok thank you guys for your help i just ogt back in form working on on i think i got it now i drove it around and i am not getting the check engine lite now and it is starting on like the secound crank over . the problem was the first sparkplug was only gaped at .25 and needed to be gapped at .50
curtis croskey jr
jar754 
Copper - Posts: 142
Copper spacespace
Joined: December 16, 2003
Location: Illinois, United States
Posted: July 19, 2008 at 2:12 PM / IP Logged  
they should be at .048-.053in. or 1.2-1.3mm , for a 95 intrepid 3.3 engine and for a 3.3 .033-.038in or .8-.9mm . you probably didnt need a fuel pump
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer