the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 ford expedition rear dvd integratio


Post ReplyPost New Topic
< Prev Topic Next Topic >
goodfellas 
Member - Posts: 2
Member spacespace
Joined: July 20, 2008
Location: California, United States
Posted: July 20, 2008 at 11:09 PM / IP Logged  
im working on a 2007 expedition does anyone know if there is a integration module for the rear dvd entertainment system i am installing a kenwood 7100 double din nav unit and would like to add the rear dvd to the input audio, video lead
davngr 
Copper - Posts: 109
Copper spacespace
Joined: October 20, 2007
Posted: July 21, 2008 at 1:43 AM / IP Logged  
http://www.sonicelectrnix.com/item_12663_Metra+70-5520AV.html  this should do the trick if you want to integrate audio, as far as watching video, th only way i have ben able to do that is to hard wire. 
life is a comedy to think, a tragedy to feel
goodfellas 
Member - Posts: 2
Member spacespace
Joined: July 20, 2008
Location: California, United States
Posted: July 21, 2008 at 10:05 AM / IP Logged  
i have that part, the problem is their are 4 wires on the back of the factory connector and their are 6 wires on the aftermarket harness. only 1 set of the rca's and 1 of the blue remote wires match up to any of the pins on the aftermarket harness. i have the rca connected to the audio/video in on the kenwood deck and i made sure the signal is active through the deck but still have no audio from the rear tv. i did figure that i would have to hard wire the video signal between the dvd player and the rear screen to get a video signal to the front monitor but i cant figure out why i have no audio.
davngr 
Copper - Posts: 109
Copper spacespace
Joined: October 20, 2007
Posted: July 22, 2008 at 11:48 AM / IP Logged  

goodfellas wrote:
i have that part, the problem is their are 4 wires on the back of the factory connector and their are 6 wires on the aftermarket harness. only 1 set of the rca's and 1 of the blue remote wires match up to any of the pins on the aftermarket harness. i have the rca connected to the audio/video in on the kenwood deck and i made sure the signal is active through the deck but still have no audio from the rear tv. i did figure that i would have to hard wire the video signal between the dvd player and the rear screen to get a video signal to the front monitor but i cant figure out why i have no audio.

if your confortable hard wireing vidoe just go ahead and hard wire audio too, all the wires will be in the same harnes. just make sure you let the custumer know his factory warranty will be void, i generaly tell custumers work of this nature is *as is* so it don't come back and bite me in the butt.

life is a comedy to think, a tragedy to feel

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer