remote wire for second amp?

Home / the12volt's Install Bay / Car Audio / remote wire for second amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bullseye753

Copper - Posts: 61

Joined: May 27, 2008

Location: North Carolina, United States

Posted: July 27, 2008 at 6:17 PM / IP Logged

Im going to be installing my second amp.. i am going to use a distro. block for the power.. but for the remote can i just bridge it from amp to amp? is this a perfectly safe thing to do?

Back to Top

audioinstaller3

Copper - Posts: 59

Joined: June 22, 2008

Posted: July 27, 2008 at 7:15 PM / IP Logged

Yes its fine just to run the remote wire from one amp to the other

Back to Top

Search for other posts by audioinstaller3

audiocableguy

Copper - Posts: 630

Joined: January 27, 2003

Location: Idaho, United States

Posted: July 27, 2008 at 8:59 PM / IP Logged

I use a 30A Bosch Relay on the Remote wire at the deck. A 3 amp fuse to a relay to processors, amps etc. Adding more gear later, no problem. If a short does occur the deck won't be damaged. It's worth the $6 for the relay and 10 minutes of time.

Back to Top

s_goodie

Member - Posts: 44

Joined: November 30, 2007

Location: Michigan, United States

Posted: July 29, 2008 at 11:24 PM / IP Logged

yes no problem other than loks unless you hie it good but it will work the same

Stuey BABE

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote wire for second amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.