viper 550hf transmitter

Home / the12volt's Install Bay / Car Security and Convenience / viper 550hf transmitter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

saskpuller

Copper - Posts: 144

Joined: November 14, 2006

Location: Canada

Posted: July 30, 2008 at 8:52 PM / IP Logged

Have a older Yukon in getting the r/s working again. Got everything going but can't seem to get the LED light on the transmitter to respond to anything. It stays on solid. It's a 2 button remote. Door locks with button I and nothing on button II that I can tell. Both buttons to start. What can I do to get this LED to shut off and work properly?

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: July 31, 2008 at 3:40 PM / IP Logged

Sounds like it's in valet mode, turn the ignition ON, then OFF, then press and release the valet pushbutton, and the LED should go out. If the systemids new enough, you can..... with the drivers door OPEN, press button ONE, then button TWO then button ONE again, and the LED should go out. Let us know if you still have a problem. Mark.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: August 01, 2008 at 11:42 AM / IP Logged

i have never seen the light on the remote stay on in valet mode, only the LED on the dash... sounds like it might be a bum remote....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 550hf transmitter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.