2008 cobalt/g5 clutch bypass

Home / the12volt's Install Bay / Car Security and Convenience / 2008 cobalt/g5 clutch bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

audiomaninc

Copper - Posts: 108

Joined: April 18, 2007

Location: United States

Posted: August 07, 2008 at 3:35 PM / IP Logged

Has anybody put a manual tranny starter in one of these cars? The clutch has 3 wires coming from it and the voltage on them seems to vary depending on how far the clutch is pressed. Any help is GREATLY appreciated!

2003 Dodge Neon R/T

Alpine CDA9813, RF T2000.1bd, RF T162S, RFT142C, RF T600.4, RF T215D4

140.7 @ 28Hz

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: August 08, 2008 at 9:36 AM / IP Logged

light green pin B7 at the LARGE connector left of the stearing column under the dash.

You need a negative "start" trigger thru a 180ohm resistor attached to this wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 cobalt/g5 clutch bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.