viper 5900 into 01 tacoma

Home / the12volt's Install Bay / Car Security and Convenience / viper 5900 into 01 tacoma (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

quadracer70

Member - Posts: 5

Joined: September 05, 2008

Location: California, United States

Posted: September 05, 2008 at 11:25 PM / IP Logged

I just bought a 5900 and need some install help. I want to install it myself and need an install guide and wire diagram. THANKS

Back to Top

quadracer70

Member - Posts: 5

Joined: September 05, 2008

Location: California, United States

Posted: September 05, 2008 at 11:29 PM / IP Logged

quadracer70 wrote:

I just bought a 5900 and need some install help. I want to install it myself and need an install guide and wire diagram. THANKS

OH this is a stick shift, so remote start help to. viper 5900 into 01 tacoma -- posted image.

Back to Top

hurleyloser

Copper - Posts: 157

Joined: February 05, 2005

Location: California, United States

Posted: September 06, 2008 at 2:17 AM / IP Logged

i highly recommend to save yourself the headaches and take it to a professional, if you still want to attempt the install, I'm willing to help you out, I am by no means trying to discourage you. Just be prepared for a lot of work and the dangers of damaging something. A 5900 should only be installed in a manual transmission vehicle with the appropriate module that will ensure that it is not in gear to enable remote start. I've seen more manual transmission vehicles plow into something on accident than there should be. Luckly none of those cars ever hit anyone or caused any harm.

MECP Master Certified Technician

ASE A6 Certified Technician

Back to Top

quadracer70

Member - Posts: 5

Joined: September 05, 2008

Location: California, United States

Posted: September 06, 2008 at 2:25 AM / IP Logged

I was going to call around sat or monday to see how much to get it installed, but if it is to much I might need your help. About the module, where do I get one. $$$

Back to Top

quadracer70

Member - Posts: 5

Joined: September 05, 2008

Location: California, United States

Posted: September 06, 2008 at 9:59 PM / IP Logged

I have been trying to find a wiring diagram for the DEI 689M. Anyone have one??

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5900 into 01 tacoma

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.