Compustar

Home / the12volt's Install Bay / Car Security and Convenience / Compustar (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

DMookie

Member - Posts: 3

Joined: September 23, 2002

Location: United States

Posted: March 11, 2003 at 12:35 PM / IP Logged

Hey I just had a compustar alarm installed on my 1996 Cavalier Coupe. I now have a small problem. I noticed just recently that the dome light is staying on. It's not staying on all the way, just half way. Kinda half fillament lighting. I was told this could be the diodes by the door pins. Can someone direct me a little better on what to look for? I mean say it IS the diodes, how will I know, or what should I do? If someone can help me out here that would be great.

wiremadness

Member - Posts: 33

Joined: February 27, 2003

Location: United States

Posted: March 12, 2003 at 8:17 PM / IP Logged

A very common problem on Chevys is the door pins themselves. Try removeing the driver's door pinswitch & disconnect both wires. (Should be white & tan). If this cures the problem, replace the switch.

If not, then reassemble the switch, reinstall. Disconnect the alarm door trigger wire & see if problem persists.

Good luck!

Chris

Store Manager

shawoo

Member - Posts: 19

Joined: March 01, 2003

Posted: March 14, 2003 at 8:30 AM / IP Logged

Let me know how that compustar system works. The place i went to said that those units have a lot of troubles (the pager systems)...i wanted one really bad, but in the end i just went to cc and got the audiovox system installed.

DMookie

Member - Posts: 3

Joined: September 23, 2002

Location: United States

Posted: March 14, 2003 at 2:49 PM / IP Logged

So far I love it. Just need to get this fixed then, I'll tell ya more.

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: May 16, 2003 at 8:00 PM / IP Logged

Just finished installing 2wss-as in my RSX and its stuck in valet mode, pressing I and III doesnt do anything. It only locks and unlocks, any help?

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: May 16, 2003 at 9:10 PM / IP Logged

Yeah pull it out and get an alarm that will work compustar suxs ass... they cost me over $10gs in bad units that continually fail. get rid of it while you can....

Joe O'Byrne

Owner / Installer

Jeffqb11

Member - Posts: 3

Joined: May 25, 2003

Location: United States

Posted: June 03, 2003 at 8:42 PM / IP Logged

Hey am having a problem with mine. The pager will only lock and unlock my doors but other than that it works great. I took it back to the dealer and they had to send off the brain back to compustar. How would you go about returning it? I had it in my car a week before it was sent back and that was a month ago.

mrmusic

Member - Posts: 1

Joined: May 31, 2003

Location: United States

Posted: June 05, 2003 at 12:06 AM / IP Logged

I just Installed on In my 2003 Ford E350 SD diesel Van

It was All that Bad The hardest Part Was trying to find how to hook it up with No wiring lay out. I will be Posting what I found and How It gets hooked Up Tomarrow..

Chris

Jackson NJ

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.