viper 560xv problems

Home / the12volt's Install Bay / Car Security and Convenience / viper 560xv problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

unclebeaner

Member - Posts: 2

Joined: September 11, 2008

Location: Michigan, United States

Posted: September 17, 2008 at 1:32 AM / IP Logged

hi im new to the site and like it so far, i took the said viper system out of my chevy truck due to it being wrecked. i installed in into a 98 jeep cherokee. everything works great thanks to your banks of knowledge lol. no problem now is the siren will not stop sounding. constant power coming out of brown wire. any thoughts?anyone else have this issue? thanks in adavnce brandon

i break everything

Back to Top

albertatech

Member - Posts: 36

Joined: May 01, 2007

Location: Alberta, Canada

Posted: September 26, 2008 at 6:57 PM / IP Logged

Can you please list the connections you have made? Please be specific including tracer colors (ie. Pink/white is a pink wire with a white stripe) and where the wires are (ie. ignition harness or describe the harness from the remote start system). This will allow troubleshooting as to which is misconnected. thx :)

Back to Top

unclebeaner

Member - Posts: 2

Joined: September 11, 2008

Location: Michigan, United States

Posted: September 26, 2008 at 11:00 PM / IP Logged

i used the install guide i downloaded from here and i use bullydogsecurity.com for connection points

i break everything

Back to Top

albertatech

Member - Posts: 36

Joined: May 01, 2007

Location: Alberta, Canada

Posted: September 27, 2008 at 5:03 PM / IP Logged

Ok well I copied and pasted that site and got nothing from it other than it being a phishing site. Here is what I have for that model for vehicle connection points.

1998 JEEP CHEROKEE WIRING DIAGRAM SCHEMATIC

+12VDC + RED & PINK/BLACK IGNITION HARNESS

STARTER + YELLOW IGNITION HARNESS

IGNITION 1 + DARK BLUE IGNITION HARNESS

IGNITION 2 + BLACK/ ORANGE IGNITION HARNESS

ACCESSORY + BLACK/ WHITE IGNITION HARNESS

LOCK - ORANGE / PURPLE DRIVER KICK PANEL, MUST USE RELAYS, TEST WITH DOORS CLOSED

UNLOCK - PINK/PURPLE DRIVER KICK PANEL, MUST USE RELAYS, TEST WITH DOORS CLOSED

PARKLIGHTS + BLACK / YELLOW HEADLIGHT SWITCH

BRAKE + WHITE/ TAN BRAKE SWITCH

TACH AC GREY BLACK PLUG AT PCM Notes: The PCM (powertrain control module) is located on the drivers side inner fender well near the radiator support.

HORN - BLACK/ RED STEERING COLUMN

DOOR PIN - YELLOW DRIVER KICK PANEL IN GREY 2 PIN CONNECTOR

Are these the same as what you have connected?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 560xv problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.