Clifford Matrix RS3 problem

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Matrix RS3 problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 16, 2003 at 6:16 PM / IP Logged

What about the alarm antenna being mounted in the ceiling near my sunroof controls? Should this affect the remote/pager range? If so, how much?

RufNUSD

Copper - Posts: 184

Joined: December 10, 2002

Location: United States

Posted: March 16, 2003 at 11:58 PM / IP Logged

I could be wrong here. But when I replaced my RS2 with a RS3 the antenna cord had one addl wire...hence no transmit. They probably overlooked this and when you came back they lied and said it was the brain but eventually replaced everything that they needed to.

3M double stick sucks for antennas...nothing compares to the original.

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 17, 2003 at 5:08 PM / IP Logged

What about the alarm antenna being mounted in the ceiling near my sunroof controls? Should this affect the remote/pager range? If so, how much?

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 19, 2003 at 12:28 PM / IP Logged

What about the alarm antenna being mounted in the ceiling near my sunroof controls? Should this affect the remote/pager range? If so, how much?

DeathsJester12V

Silver - Posts: 352

Joined: July 22, 2002

Location: United States

Posted: March 20, 2003 at 11:19 PM / IP Logged

it shouldn't affect it. And what are those guys smoking. whatever it is, they either need to quit or start sharing so people will start believing their lines of BS.

Search for other posts by DeathsJester12V

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Matrix RS3 problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.