remote start autocommand 25622

Home / the12volt's Install Bay / Car Security and Convenience / remote start autocommand 25622 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

robus

Member - Posts: 3

Joined: September 05, 2008

Location: New York, United States

Posted: September 20, 2008 at 11:23 PM / IP Logged

I installed AutoCommand remote start model 25622 in my 04 Galant GTS.

This is the type which uses factory remote. It went pretty easy, except remote start activation. Remote works when I touch the ground with remote start wire.

It needs negative pulse to activate. I would like to use unlock (2x). I have no clue where to look for the actual open door signal.

Does anybody have an idea what should I do?

Thanks in advance.

Rob

i am an idiot

Platinum - Posts: 13,709

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 21, 2008 at 1:48 AM / IP Logged

remote start autocommand 25622 -- posted image.

Power Unlock

LT.GREEN/ RED

(-)

AT THE ETACS MOD

The ETACS module is located behind the fusebox. It does not say whether it is in the car or in the engine compartment.

robus

Member - Posts: 3

Joined: September 05, 2008

Location: New York, United States

Posted: September 21, 2008 at 8:36 AM / IP Logged

I am looking for an output not input. Lt GREEN/ Red wire will open my doors. This wire doesn't change state when doors are being activated.

robus

Member - Posts: 3

Joined: September 05, 2008

Location: New York, United States

Posted: September 21, 2008 at 1:24 PM / IP Logged

OK, I figure it out.

Using positive impulse from unlock wire to my door actuator and converting it to negative by using relay.

Rob

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: September 21, 2008 at 1:39 PM / IP Logged

Good job! I was just getting ready to post that.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start autocommand 25622

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.