530t trouble

Here is my whole problem just an FYI I hooked mine all up and it didnt work propery. So I went and started over and looking for help on the 12 volt site. Right now I currently have all the grounds hooked up to a bolt under the dash, 12v wire straight to the battery (for testing purposes), I have the driver side up motor and switch hooked to the WHITE/ black wire on the car (according to this site these 2 wires are what I need to hook into) that I cut and hooked them up how they should (switch side motor side etc) When I take the orange wire and manually ground it out it will move the window about an inch then stop. I tried putting the dip switches in the down position (strongest setting) and it didnt matter. It seems like the 530t unit itself keeps shutting it down right away. any help ou can supply would be much appreciated.

What size wire do you have run to the battery?  I would reccomend 10 Ga, 8Ga preferably.  Switchs set to default/factory/nornmal setting.  Not the highest setting.