the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

’00 mitsubishi galant w/ infinity system


Post ReplyPost New Topic
< Prev Topic Next Topic >
hustlin247 
Copper - Posts: 79
Copper spacespace
Joined: June 08, 2004
Posted: September 28, 2008 at 9:33 PM / IP Logged  
So, this afternoon I bought my wife a '00 Mitsubishi Galant. The stereo didn't work because it had lost power and needed the security code entered. We got home and I fixed that.
Now the HU powers on and appears to be playing (CD timer is counting) but there is no sound whatsoever, radio nor CD.
I checked the connections at the Infinity amp under the seat and they seem fine. I checked the fuse in the cabin fuse panel that is marked with a musical note symbol. This must be the amp fuse and not the HU fuse because I can remove it w/o losing power to the HU. Unfortunately, they only used symbols and not words on the fuse chart... Anyways, everything looks fine and shows no signs of ever being messed with (no scratches from screwdrivers etc) but I've got nothing.
What should I check next?
One thing I noticed is that when I turn the volume knob on the HU the display does not change. It doesn't display any graphic to indicate the volume level. I'm not sure if there's supposed to be one. Hopefully, someone has experience with this system and can verify this... perhaps I have a faulty knob? Long shot maybe.
Any help would be appreciated.
'94 Ford Explorer / Kenwood KVT-815DVD / RF Power T1682C 6x8 (all doors) / RF Power T10001 / 12" Kicker L5 (x4) / Optima Yellow Top Battery
kassdog 
Copper - Posts: 257
Copper spacespace
Joined: March 09, 2007
Location: United States
Posted: September 29, 2008 at 12:22 AM / IP Logged  
either one of two things, radio or amp. Only really way to check is hook up a tone generator before the amp and test it. If still no sound then its the amp. If there is sound then its the radio.
megaman 
Copper - Posts: 385
Copper spacespace
Joined: June 24, 2008
Location: Montana, United States
Posted: September 29, 2008 at 8:43 AM / IP Logged  
check all fuses in the vehicle.  The manufacturers use other circuits for the stereo as well.  You could have another blown fuse either in the interior fuse panel or the panel under the hood.
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: September 29, 2008 at 11:12 AM / IP Logged  
I'm going to say something stupid........ are speakers actually in the the car and do they really work???  You did buy the car used and no telling what the previous owner did with them.
Hornshockey 
Silver - Posts: 520
Silver spacespace
Joined: January 31, 2005
Location: Texas, United States
Posted: September 29, 2008 at 11:45 AM / IP Logged  

Did you use the amp integration harness (the one with the round black plug)?

Nevermind, I re-read and it seems you're still using the factory radio

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: September 29, 2008 at 3:08 PM / IP Logged  
kassdog wrote:
either one of two things, radio or amp. Only really way to check is hook up a tone generator before the amp and test it. If still no sound then its the amp. If there is sound then its the radio.
'Cept that's gonna be tough to do... He's got a factory amp!
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
kassdog 
Copper - Posts: 257
Copper spacespace
Joined: March 09, 2007
Location: United States
Posted: September 29, 2008 at 3:15 PM / IP Logged  
I've tested factory amps with a tone generotar without any problems. I'm not using a 9v, I'm actually using a tone generator thus it won't damage the amp. Just has to make sure the factory amp is powered on.
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: September 29, 2008 at 3:18 PM / IP Logged  
Sure... But how many people have the requisite equipment to do that with a factory amp? Not all of us! Thus the "difficulty", not the "impossibility". ’00 mitsubishi galant w/ infinity system -- posted image.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
spec auto 
Member - Posts: 6
Member spacespace
Joined: September 30, 2008
Location: Florida, United States
Posted: September 30, 2008 at 8:28 PM / IP Logged  

chances are high its the amp thats bad, ive seen that car too many times take in water (just a little) the amp gets a little wet and poof  the amps dead,

as for the tone generator in that application it wont work unless he cuts the black plug and starts probing wires After turning on the amp through that plug also, chances are hes not gonna do this, BUT lets say he were to test the amp and he finds out the amp is good now hes gonna have to rewire that plug which is a nightmare cause the wires are super thin and then buy an new factory radio, dont do it, its wack and the whole test is a waste of time...buy your wife a new radio and rewire that amp, itll sound better and save you the time again when that amp goes bad becuase they always go bad..also like someone saId before, pop open the trunk and make sure the car has speakers...

hustlin247 
Copper - Posts: 79
Copper spacespace
Joined: June 08, 2004
Posted: October 01, 2008 at 12:13 PM / IP Logged  
spec auto wrote:

chances are high its the amp thats bad, ive seen that car too many times take in water (just a little) the amp gets a little wet and poof  the amps dead,

as for the tone generator in that application it wont work unless he cuts the black plug and starts probing wires After turning on the amp through that plug also, chances are hes not gonna do this, BUT lets say he were to test the amp and he finds out the amp is good now hes gonna have to rewire that plug which is a nightmare cause the wires are super thin and then buy an new factory radio, dont do it, its wack and the whole test is a waste of time...buy your wife a new radio and rewire that amp, itll sound better and save you the time again when that amp goes bad becuase they always go bad..also like someone saId before, pop open the trunk and make sure the car has speakers...

Sounds good. Not only do I not have a tone generator.. (would a small speaker work in its place to test the wires?) but you make another good point... if the amp is good and the deck is bad then there's no way in hell I'm going to try to use that deck with an aftermarket amp.
I'll try all the fuses and if I get nothing I'll put in an aftermarket deck. I think I have a Kenwood with MP3 around here somewhere...
'94 Ford Explorer / Kenwood KVT-815DVD / RF Power T1682C 6x8 (all doors) / RF Power T10001 / 12" Kicker L5 (x4) / Optima Yellow Top Battery
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer