the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

car only starts with remote starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
alscrx 
Member - Posts: 39
Member spacespace
Joined: March 30, 2005
Location: United States
Posted: October 02, 2008 at 9:54 PM / IP Logged  

Guys, recently i have not been able to start my car via the key in the ignition!  I turn the key and i get nothing, as though the starter is killed. I have a security keypad hooked up with my galaxy 8000rs alarm. I had no problems till recently. So i replaced the 2 relays i seen that control the keypad and remote start and still does the same thing. When i enter the code on the keypad i hear the relay click so i think thats working. I have a toggle switch hooked up to the keypad and even when its off i still can't start her up with the key.

I am however,able to remote start the car with no problem. Kinda sucks every time i wanna get in and go i got to remote start the car.

What could be causing this?

i am an idiot 
Platinum - Posts: 13,672
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: October 03, 2008 at 5:11 AM / IP Logged  
The only thing I can think of is a bad connection from the ign. switch to the point that the remote start connects to the start wire.  Or a bad ign. switch.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 03, 2008 at 11:52 AM / IP Logged  
DID YOU HOOK UP ANTI-GRIND?     i have had a few of the DEI XCRS relay packs anti-grind relays latch... which give you the exact same problem.... just a thought.....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
alscrx 
Member - Posts: 39
Member spacespace
Joined: March 30, 2005
Location: United States
Posted: October 04, 2008 at 11:12 PM / IP Logged  

kgerry wrote:
DID YOU HOOK UP ANTI-GRIND?     i have had a few of the DEI XCRS relay packs anti-grind relays latch... which give you the exact same problem.... just a thought.....

I don't remember if i did. I did the install awhile ago. So what was your resolution to the relay packs latching??

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 06, 2008 at 1:32 PM / IP Logged  
tap on it with a screwdriver... i'll unlatch... or replace it......
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
alscrx 
Member - Posts: 39
Member spacespace
Joined: March 30, 2005
Location: United States
Posted: December 26, 2008 at 9:26 PM / IP Logged  
well so you guys know it was the ignition switch itself.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer