scytek 5100 rs in 2003 ford ranger

i'm installin a scytek remote start model 5100-RS, IN A 2003 ford ranger, everything works except the remote start, when i hit the remote start, the parking lights blink seven times  and nothing happens, the manual says in the diagnostic section that when the lights blink seven times that the remote start is cancelled but i can't figure why, i've rechecked all my connections and everything is fine,  anyone encounter this beforecommit your way to jehovah and he will act in your behalf. psalms 37:5

1. Test brake input while operating remote start. 2. Test hood input while operating remote start. 3. Test neutral safety input (if you have one) while operating remote start.

everythin's as it should be,  any other suggestions, thanks anywaycommit your way to jehovah and he will act in your behalf. psalms 37:5

Did you hook the small gauge ignition wire to the heavy gauge ignition wire? Did you set it for gas mode and tach monitoring? Did you successfully learn tach? I sometimes stumble on these when I haven't installed a Scytek for a while.Brent Haugen

Fargo, ND

did all that and still, it's diesel if  u didn't know, programmes it to diesel also and still nunn. any more suggestionscommit your way to jehovah and he will act in your behalf. psalms 37:5

We have very few Diesel Rangers here it the US - so I assumed gas. Brent Haugen

Fargo, ND