the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

'07 avalanche domelight


Post ReplyPost New Topic
< Prev Topic Next Topic >
mrdakota 
Member - Posts: 7
Member spacespace
Joined: October 26, 2005
Location: United States
Posted: November 17, 2008 at 6:04 AM / IP Logged  

I installed an overhead monitor in my '07 Avalanche this weekend and the stupid domelight is giving me fits. It is the JVC KV-MR9010 which uses LED's and I believe the dome light is operated by the BCM.

When I open the doors the OEM front maplight comes on and the rear monitor light goes off, then when I close the doors the map light goes dim to off and the monitor LED's turn on? The wiring is right but I'm still confused. I'm thinking the logic in the KV-MR9010 is looking for a pin switch and it is getting a BCM signal instead. Has anyone encountered this before? I've searched the best I could but no resolve.........

Keith 

extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: November 20, 2008 at 11:46 AM / IP Logged  
Sounds like the screen is looking for a negative signal to turn the lights on, and the chevy trucks give a positive output, as well do not tie into any wires except the dome trigger wire at the light or you will end up with a truck with a deak battery.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, August 14, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer