rearview camera

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / rearview camera (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

j-ro

Member - Posts: 1

Joined: November 18, 2008

Location: New York, United States

Posted: November 18, 2008 at 10:08 AM / IP Logged

I have installed a rearview camera on my 2008 Honda Accord Coupe. It sits above my license plate. The problem is when my lights are on the license plate light washes out the image displayed on my screen. I would like to have the license plate light go out when I put the car in reverse. Any ideas would be appreciated. Thank you.

Phreak480

Copper - Posts: 84

Joined: June 12, 2003

Location: United States

Posted: November 18, 2008 at 10:15 AM / IP Logged

would be simple enough to just wire a N.C. (normally closed) relay inline with the existing license plate lite wiring. Then trigger the relay which would open the contacts with the reverse light wiring. Then when your reverse lights come on it would open the contacts turning off the plate lamps.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rearview camera

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.