power door locks, alarm, chevy cavalier

ok i did wire it up like you showed me on the last diogram.

on #86 to alarm lock output i put the GREEN / WHITE (-) factory alarm rearm wire. now it locks fine with the remote control but i can not get it to unlock with the control. but if i hit the negative wire on it it disarms (opens)

i also tried putting the GREEN/ black wire coming from the remote start unit on the other relay #85 to unlock but still no luck.

the wires i have left on my remote start unit are: Blue (unlock); Green(lock); Greay/black (wait to start); WHITE/ Blue(activation Input); gree/black(factory alarm disarm). do i need to used or put together any of these wires to unlock the locks? or another way of wiring? thanks!

the BLUE(unlock) and GREEN(lock) wires are the ones you should be using for the relays 85 and 86 pins.

now how about the wires coming out of the black box for the door lock kit?

those are the Brown & White? i don't use those?  also i don't have to use any other wires coming out of the remote start?  will it be best when i hook all these wires up to disconect the remote start hook up the wires and then connect the remote start back up?

thanks!!

Greay/black (wait to start); WHITE/ Blue(activation Input); gree/black(factory alarm disarm).

RED / white; WHITE/ red; GREEN / WHITE; light GREEN/ black;

cool i'll try that! thanks alot for your time and help!

can anyone tell me how can i know how to get a tech tip # 1041 for door locks from direct electronis.

i'm not a member but it says on the installation manual to look @ tech tip #1041.

can some one help me out with this one? Thanks!