looking for good installer

Home / the12volt's Install Bay / Car Security and Convenience / looking for good installer (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tsremodel

Member - Posts: 15

Joined: November 21, 2008

Location: Connecticut, United States

Posted: November 21, 2008 at 4:04 PM / IP Logged

Hey guys. Just like to say what a great site this is.

I've installed a few alarms and a remote starter in the past but now looking to hire someone to install one in my 05 ford e350 box truck. I got the alarm/starter right now its a Pro9775t says on the box but the unit model says its a pro9800. I know its a good working starter / alarm seeing it was pulled from a buds truck before trading in. I don't have much in the truck no power locks no trunk, but would like to pin the rear doors.

I am located in Southington Connecticut and hoping to get it installed over the weekend :) I know I'm not asking for much. Is there any good installers located near me? I hold a e-1 and own a remodeling company so I got all the tools if needed.

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: November 21, 2008 at 6:05 PM / IP Logged

https://www.the12volt.com/installbay/findinstaller.asp

Back to Top

tsremodel

Member - Posts: 15

Joined: November 21, 2008

Location: Connecticut, United States

Posted: November 21, 2008 at 7:47 PM / IP Logged

Thanks

Back to Top

tsremodel

Member - Posts: 15

Joined: November 21, 2008

Location: Connecticut, United States

Posted: November 21, 2008 at 8:55 PM / IP Logged

Well after leaving a message, and doing some research I am now thinking maybe I'll just do it myself. I guess my question is what do I need to start a 2005 Ford E-350 superduty with a gas engine and automatic tranny. Pursuit Pro-9800

I got most of it figured out so far but my first question is does accessory heater blower 2 need a relay? And should I power the relay from IGN3?

Thanks for the help guys.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

looking for good installer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.