door panels

Home / the12volt's Install Bay / General Discussion / door panels (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 15, 2003 at 10:52 AM / IP Logged

this may not fit in here but more peeps will read here. i have a 2002 ford E150. i put power windows and door locks in it. the dealer wants $100 for the switches and plastic frames for both doors. i have aftermarket switches that i can use but they wont fit in the frames that came with the van.(they already have some cut outs in them) the panels are grey. do they make grey ABS plastic?? do you have any ideas for me. i just need flat frames so i can cut the holes for the switches. i can send a pic of the frames if that will help.

thks,

david

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: March 15, 2003 at 11:09 AM / IP Logged

I use this stuff on custom installs http://www.hi-techindustries.com/cat_page_1.htm it is a called a dye but it’s no different than spray paint. I use it on plastic and its very durable I have never had a problem with it coming off. Just be sure to match up the color correctly. Now I don’t know were you would buy it but I get it from a detail supply shop http://www.3dproducts.com/cgi-bin/3dproducts/index.html search for dye.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 15, 2003 at 11:11 AM / IP Logged

thks for your help.

david

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: March 15, 2003 at 12:22 PM / IP Logged

hope it works out

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door panels

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.