the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

canmax400dei, 2004 acura tl


Post ReplyPost New Topic
< Prev Topic Next Topic >
joebubba 
Copper - Posts: 107
Copper spacespace
Joined: December 21, 2005
Posted: January 02, 2010 at 3:28 PM / IP Logged  
Duh....Never mind. RTFM:
Reset Module
- Disconnect the module from any power source (undock the module from the system).
- Press and HOLD the integrated programming button (IPB).
- Connect the module to the power source (dock it again)
- Wait until the orange LED turns ON (should be 3 seconds)
- Release the integrated programming button (IPB).
- Reset is done.
Guess docking and undocking with power on is fine. It should retain settings while undocked, unless you use reset procedures above.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, December 7, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer