clifford avantguard 5.0

Home / the12volt's Install Bay / Car Security and Convenience / clifford avantguard 5.0 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: December 04, 2008 at 11:43 PM / IP Logged

Anybody have this alarm. I have it installed in my 05 Tacoma and I got everything working except the 2nd window module. My first DEI 529T works great my second one that controls the rear will do the roll down but wont roll up when the alarm is armed. Has anyone had this problem. I am also wondering if anyone has been able to change the pulses for the programing. I wanted to have the vehicle chirp once for arm and 2 times for disarm, but default is set to opposite. I've been fooling around with the programing for a while now and just cant seem to make it work properly.

stanward

Copper - Posts: 57

Joined: April 09, 2003

Location: Hawaii, United States

Posted: December 05, 2008 at 2:05 AM / IP Logged

Hello,

I have the AG5 installed in my pickup truck. However, I am using the Smart Windows 4 module, not the DEI 529T.

Have you thought of using the SmartWindows 4 instead? My friend who is a Clifford rep said the SmartWindows is much better than the DEI 529T.

You can't modify the arm/disarm chirping. Default is set for arm=2 and disarm=1. I recall the Alpine alarms (back in the day) used to have arm=1 and disarm=2.

Stan

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 05, 2008 at 3:33 AM / IP Logged

Clifford always had 2 on and 1 off, there was even an internal controversy when DEI took them over to change it but they stood their ground.

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: December 05, 2008 at 10:17 PM / IP Logged

So what does that mean... I don't get it... is there something wrong with the alarm?

stanward

Copper - Posts: 57

Joined: April 09, 2003

Location: Hawaii, United States

Posted: December 06, 2008 at 3:52 AM / IP Logged

There is nothing wrong with your alarm. The chirping is default like that for Clifford line of alarms (non DEI stuff).

Stan

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford avantguard 5.0

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.