the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

carvox remote start, 99 dodge caravan


Post ReplyPost New Topic
< Prev Topic Next Topic >
hall0743 
Member - Posts: 2
Member spacespace
Joined: December 18, 2008
Posted: December 18, 2008 at 6:52 PM / IP Logged  

I installed a carvox two way remote start in a 99 dodge caravan.  Had it all working just perfect.  The next day it doesn't want to work.  Everything seems to work fine except starting.  It locks and unlocks my doors.  The parking lights flash when opening doors.  The two communication seems to be working fine as it will show me when a door is open on the remote.  But when I try to start it just runs for a second and dies.  It also cranks the starter over a little longer than it should...longer than when it was operating correctly the day before.  I've looked over everything and I don't see what could have happened. 

My valet switch is staying lit constantly now also.  I was reading somewhere about holding the valet switch down while the vehicle was running with the key to learn the tach signal.  I figured what the hell and I tried it on mine which has made the valet switch stay lit now.

chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: December 19, 2008 at 5:14 AM / IP Logged  
Where do you have your tach wire connected to?
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
hall0743 
Member - Posts: 2
Member spacespace
Joined: December 18, 2008
Posted: December 19, 2008 at 7:27 AM / IP Logged  

I had it coiled around my number one plug wire as it said in the manual.  After all this started happening I tried connecting it to the tach wire going to the coil pack which I got a reading of about 330 when setting my meter to AC volts.

The valet switch isn't staying lit anymore...I got that to turn off, I think I had it in some sort of service mode or something.  The manual on this thing is pretty vague.

chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: December 19, 2008 at 3:57 PM / IP Logged  
Ahh...one of those Chinese tach wires with no instructions - done a few of them and didn't like it one bit. However they eventually worked.
Try holding the tach wire to the positive battery terminal during remote start. If that wire is anything like others I've done it will sense a proper remote start when it sees:
a. A valid tach signal.
b. Increased voltage from the alternator with the engine running.
c. Ground from the oil pressure switch.
Unfortunately it's hit or miss which one will actually work with any given car. If the tach wire doesn't work when temporarily connected to constant power, try remote starting and then applying the wire to ground once the engine's actually started. (This simulates the oil pressure switch.)
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 19, 2008 at 5:28 PM / IP Logged  
hey chriswallace, i installed a few no name units myself, but for the oil pressure indicator, i always ran into units that when it saw a 12v, it would stop cranking.
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: December 20, 2008 at 3:03 AM / IP Logged  
Aww hell tedmond, you would be able to make junk work wouldn't you? How many normal, average installers would even try? :-0
I don't think I've ever found one of those RS's that wouldn't work with the start sensing wire connected to battery voltage either...I guess the "oil pressure indicator" connection remains theoretical.
I hope no one thought my previous comment ethnic in nature...just maybe a bit nationalistic. It doesn't matter where any product's made, just how well the manual is written in English and how few times it will have to go through customs to get to you. Bypasskit's stuff has waited at the border for a day or two a few times lately it seems as well.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer