spacer spacer spacer spacer

09 Dodge Charger, Remote Start - FYI

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 3
Member spacespace
Joined: December 17, 2007
Location: Maryland, United States
Posted: December 21, 2008 at 3:43 PM / IP Logged  

OKay, this car is kind of a pain. I did the police car version or should i say have started it. Parts needed for RS must have all 3 and nobody knew this before i started!



expresskey for new gm/chrysler

I was told the canmax400 from dei would work.IT DOES NOT!  You have to install the chwfr into the actual ignition cylinder MAKE SURE YOU PUSH IT ALL THE WAY ONTO THE CIRCUIT BOARD BEFORE SCREWING IT DOWN!! You can get the ignition switch out by un screwing the one phillips head out of the dash below it about 4 inches and pulling it back to make room after unscrewing the 4 phillips first. Parklights are in pass kick WHITE/ violet +

Brake lights in harness to left of dash opening everything else was data.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer