reseting alarm

Home / the12volt's Install Bay / Car Security and Convenience / reseting alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

shby1

Member - Posts: 4

Joined: July 16, 2007

Location: United States

Posted: December 27, 2008 at 8:59 PM / IP Logged

Hi. I have a Viper 5701 installed in a 1989 BMW 535i (e34).

My 2-way remote was failing (it would "hesitate" upon button pressing) so I deleted the remotes, figuring that if I "taught" them the routine again maybe the problem would be fixed.

Ok, I deleted the remotes, Tried to "teach" them again and no luck. After reading carefully the whole manual it says "the remotes can only be taught once". Come on, do I have 2 unusable remotes?

1) If I master reset the alarm, can I program the remotes again?

2) How do I reset the alarm? Is there a way to manually do it or do I need to use a Bitwriter?

calijtee1

Copper - Posts: 121

Joined: August 29, 2008

Location: California, United States

Posted: December 27, 2008 at 11:52 PM / IP Logged

you have to reset all the transmiters. then start from the begining only thing in doing this you have to program every button on the remote.

installers do it best. we got the magic hands!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reseting alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.