the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 grand am, avistart 4103


Post ReplyPost New Topic
< Prev Topic Next Topic >
islandersfan5 
Member - Posts: 6
Member spacespace
Joined: December 10, 2006
Posted: January 03, 2009 at 8:23 PM / IP Logged  
Hey I'm installing a AviStart 4103 with a GMDLBP kit in my wife's car...a 99' grand am no keyless entry. I like to know the best way to wire the power door locks with this combo thanks for your help.. Joey
mricicle 
Member - Posts: 2
Member spacespace
Joined: January 04, 2009
Location: Pennsylvania, United States
Posted: January 04, 2009 at 12:43 PM / IP Logged  

theres only two ways you can do it... you can see if the module you have can control the door locks.. if not you have to do it the old fasion way.. there is no best way... 

chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: January 04, 2009 at 4:38 PM / IP Logged  
Ditto - you might get lucky and find out the car originally had keyless entry and the remotes were lost(assuming you bought it used). As mricicle says, the GMDL-BP may end up operating the locks when programmed to platform 2.
You could leave the blue and green wires to it alone and try shorting them to ground to verify this once you've got 12v constant, ground, and data connected on the GMDL-BP.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer