the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

need an amp for 3 jensen xs12’s


Post ReplyPost New Topic
< Prev Topic Next Topic >
mmibumps 
Member - Posts: 10
Member spacespace
Joined: January 10, 2009
Location: Arizona, United States
Posted: January 10, 2009 at 11:45 PM / IP Logged  
ok I have an 3 jensen xs12's and need an amp! i got them at work because they where on clearance for 6 bucks a peice there 525 peak and 175 rms need the cheapest amp to run all 3. im a student and I am on a budget.  so give me some ideas ppl i know it needs to be 1 ohm stable but im having a hard time finding one  here are the specs on the manual for the subs    well tell me what you think thanks  

XS12: Thiele Small Parameters

Nom. Dia. 9.02 in (229 mm)

( Fs )/( Fo ) Hz 36.1 Hz

( Vas ) 3.1 ft3 (89.1 liters)

( Qts )=(Qms x Qes)/(Qms + Qes) 0.92

( Qms ) 9.26

( Qes ) 1.02

( Xmax ) 0.187 in (4.75 mm)

( Pe ) RMS ( Max.) 175W (525 Max.)

( Re ) DC (R) 3.6 Ohm

( Sd ) 78.4 in2 (506cm2)

( Cms ) 0.248 x 10-3 M/N

( Mms ) 2.77 oz (78.43g)

( Bl ) 7.91 Tm

(SPL ) 89 dB, 1W/1M

VC dia. 2" (51mm)

thanx4thahelpbro
mmibumps 
Member - Posts: 10
Member spacespace
Joined: January 10, 2009
Location: Arizona, United States
Posted: January 10, 2009 at 11:48 PM / IP Logged  

I know jensens are not the best but its ok igot them for 6 dollars and they still bump

thanx4thahelpbro
mmibumps 
Member - Posts: 10
Member spacespace
Joined: January 10, 2009
Location: Arizona, United States
Posted: January 11, 2009 at 9:50 PM / IP Logged  
is any1 going to help !need an amp for 3 jensen xs12’s  -- posted image.
thanx4thahelpbro
ccityroadshop 
Copper - Posts: 76
Copper spacespace
Joined: December 15, 2008
Location: Mississippi, United States
Posted: January 11, 2009 at 10:48 PM / IP Logged  
not sure how much ur wanting to spend but check out sonicelctrnix.com they have good deals,
mustang GT convertible with lots of performance mods... Alpine M500 amp with sealed enclosure, 10 inch kappa perfect, clarion cz500 head unit, kicker ks speakers all around
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: January 11, 2009 at 11:43 PM / IP Logged  
qts is extremely high on those...most suiteable for sealed or IB.
Ported they will sound like complete donkey crap unless in a big ported enclosure tuned in the 20s
Custom Enclosure Design
mmibumps 
Member - Posts: 10
Member spacespace
Joined: January 10, 2009
Location: Arizona, United States
Posted: January 13, 2009 at 12:05 AM / IP Logged  
would this be a good amp for me good for me its a lanzar vct1200
Number of Channels1 - Mono
RMS Power (4 ohms)200 watts x 2 channels
RMS Power (2 ohms)350 watts x 2 channels
RMS Power (1 ohm)N/A
Bridged RMS PowerN/A
Total RMS Power OutputN/A
Peak Power Output1950 watts x 1 channel
Total Peak Power Output1950 watts
Minimum Impedance Unbridged2 ohms
Minimum Impedance BridgedNot Bridgeable ohms
THD at Rated RMS Power0.01%
Speaker Level InputsNo
Preamp Outputs1 pair
Built-in CrossoverLow-pass (LP)
High-Pass Crossover FrequencyN/A
Low-Pass Crossover Frequency20 - 25,000 Hz
Subsonic Filter10 - 100 Hz
Signal-to-Noise Ratio90 dB
Channel SeparationN/A
Bass Boost0 - 18 dB
Bass/Gain RemoteNo
Fan CooledNo
Fuse Rating20A x 2
thanx4thahelpbro
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: January 13, 2009 at 2:31 AM / IP Logged  
No...its cheap crap
Custom Enclosure Design
mmibumps 
Member - Posts: 10
Member spacespace
Joined: January 10, 2009
Location: Arizona, United States
Posted: January 13, 2009 at 10:53 PM / IP Logged  
so what can i buy that is cheap to run them all !!!  im a student and have lil cash !!! give me some ideas 150 at most wouldnt like to spend more than 100 plus the speakers are cheap
thanx4thahelpbro
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: January 14, 2009 at 1:14 AM / IP Logged  
what is the impedance of the coils???
Custom Enclosure Design
mmibumps 
Member - Posts: 10
Member spacespace
Joined: January 10, 2009
Location: Arizona, United States
Posted: January 14, 2009 at 11:28 PM / IP Logged  
Wiring Option #1 this is how im planing on setting them up if this is what your looking for
need an amp for 3 jensen xs12’s  -- posted image.
thanx4thahelpbro
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer