the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 f250 domelight supervision


Post ReplyPost New Topic
< Prev Topic Next Topic >
jpinusmc 
Member - Posts: 22
Member spacespace
Joined: July 21, 2003
Location: California, United States
Posted: January 11, 2009 at 5:14 PM / IP Logged  
All,
I just installed an autopage rs-1000 in an 06 f-250 super duty. I used a wiring diagram that instructs to use the domelight supervision wire for the door trigger. This works except that whenever the remote start turns off the alarm sounds. I am guessing this is because when you turn off the truck, the lights come on inside.
Is there a better way to wire this/ a way to disable the dome supervision in the truck?
Thanks for the help.
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: January 12, 2009 at 12:55 PM / IP Logged  

do not use the dome supervision for the door trigger. in order to not trigger the alarm when the truck shuts down after remote start, pick up the door trigger wires from each door and diode isolate them. if you do not have factory keyless entry they are BLACK / YELLOW and BLACK/ pink in a grey plug in the drives kick panel. they are negative polarity. if you have a 4 door with factory keyless the wires are at the BCM, BLACK / YELLOW, BLACK/ pink, BLACK/ light blue and BLACK/ white. use all four and diode isolate them,


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer