r/s 2005 chrysler sebring sedan using fob

Home / the12volt's Install Bay / Car Security and Convenience / r/s 2005 chrysler sebring sedan using fob (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 15, 2009 at 6:38 AM / IP Logged

You may need to get a 556CW, i'm not sure the 555CW will work on that car.

Every once in a while i will do a RS in Chryslers and the factory alarm will honk the horn one time between the RS coming on and the alarm turning off. My own Sebring does this even and i have been too lazy to fix it :) If it does you will need to connect the disarm wire at the BCM...

Mike M2

Tech Manager

CS Dealer Services

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 15, 2009 at 7:00 AM / IP Logged

Open the car's driver's side window.

Close trunk and all doors, lock with factory remote, leave car alone for at least 30 seconds.

Reach in through the open window, insert key, start car. Then you'll know for sure if the factory alarm automatically disarms or not.

TIP: Even if it has a factory alarm, and you don't want to hook up disarm, just tell the customer they have to hit Unlock, Lock, Lock, Lock to start the car.

They'll never have to know why, but they'll be effectively disarming the factory alarm for you. Since it takes 30 seconds to arm, it'll never get a chance to re-arm before the remote start process begins.

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 21, 2009 at 10:35 AM / IP Logged

Thanks again Mike M2 and Chris Luongo! Mike M2, could you expand further why this is happening?

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: January 21, 2009 at 4:48 PM / IP Logged

its probably a timing issue

when ever i do a dodge or chrysler i only use a disarm if i am doing door locks

never has a honk issue i do dei starters only

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 25, 2009 at 10:54 AM / IP Logged

What were Chryslers? we've got loads of rusty Fiats going cheap.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

r/s 2005 chrysler sebring sedan using fob

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.