box for re sx12

Home / the12volt's Install Bay / Car Audio / box for re sx12 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

paidnfull

Copper - Posts: 125

Joined: October 24, 2007

Location: Texas, United States

Posted: January 17, 2009 at 6:48 PM / IP Logged

1000W RMS

Dual 4 Ohms

Mounting Depth: 6.5”

Electrical Q Value -Qes: 0.32

Mechanical Q Value -Qms: 4.4

Total Speaker Q Value -Qts: 0.30

Free Air Resonance -Fs: 30.6 Hz

Equivalent Compliance -Vas: 47.6 liters

One-Way, Linear Excursion -Xmax: 22 mm

Efficiency -SPL 1W/1m: 88.1 dB SPL

Effective Piston Area -Sd: 480 cm^2

DC Resistance -Re: 1.9 ohm

Force Factor -Bl: 21

airhed692005

Copper - Posts: 72

Joined: January 04, 2009

Location: Michigan, United States

Posted: January 18, 2009 at 2:31 AM / IP Logged

OK this is what to do got to box maker Fine the specs of the subs there and make a box for one sub and double it. Gives all the cuts and everything you need for the box. It even tunes it for you if you know what size port you want. Easy and simple. The only thing this does not do it fiberglass encloser which you can do the box and just add .5 to 1 cbft to the box it self. Hope this helps.

Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER

TID-896 7" screen,Amp-BX1206d

4/0power/ground cables

4-12 mofos 12ft3 box tuned 40hz DB:163.1

airhed692005

Copper - Posts: 72

Joined: January 04, 2009

Location: Michigan, United States

Posted: January 18, 2009 at 2:33 AM / IP Logged

Forgot that the box maker is from the re audio website. It is not called that but the link is right. Have fun

Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER

TID-896 7" screen,Amp-BX1206d

4/0power/ground cables

4-12 mofos 12ft3 box tuned 40hz DB:163.1

paidnfull

Copper - Posts: 125

Joined: October 24, 2007

Location: Texas, United States

Posted: January 19, 2009 at 10:01 AM / IP Logged

thanks man. Hope I can design this ish properly to my liking.

paidnfull

Copper - Posts: 125

Joined: October 24, 2007

Location: Texas, United States

Posted: January 19, 2009 at 1:31 PM / IP Logged

uhh!

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: January 19, 2009 at 5:31 PM / IP Logged

The RE calc sucks...not accurate enough for me.

Custom Enclosure Design

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box for re sx12

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.