Buying Acc. For Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Buying Acc. For Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Anthony1

Copper - Posts: 62

Joined: February 18, 2003

Location: Canada

Posted: March 18, 2003 at 11:23 AM / IP Logged

Just wondering , I am going to buy pin switches etc for my alarm. It is a dei rattler 300. Do I have to but sencer etc for this particular model or will any parts work???

essey98

Member - Posts: 4

Joined: July 02, 2002

Location: United States

Posted: March 18, 2003 at 3:22 PM / IP Logged

my viper basically work on pulses from the sensors, which basically means that any accessory capable of outputting a pulse would work. Because they're both dei, I'm pretty sure it would be the same. You might want to buy a viper sensor for the main trigger zone/s as it requires a special harness (unless you can get access to only the wire harness) but the secondary zones just use wires so any sort of sensor should do....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Buying Acc. For Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.