It Wont Stop...plz help me...

Home / the12volt's Install Bay / Car Security and Convenience / It Wont Stop...plz help me... (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blaksaga

Member - Posts: 13

Joined: March 18, 2003

Location: United States

Posted: March 18, 2003 at 3:17 PM / IP Logged

HELP plz. I just installed(tried to install) a car alarm in my truck. When I finished and reconnected the battery terminal, everything went nuts. I mean it all worked like its supposed to...the lights flashed, siren went off, etc...but I could not get it to stop. So right now the negative terminal on my battery is disconnected and i am stuck. What would be causing it to do this? I did not think it would go off if it was not armed. I tried the remote and the valet switch to stop it but just ended up having to disconnect it. Please help, thanks,

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: March 18, 2003 at 3:44 PM / IP Logged

When ever you reconnect power to an alarm it will go off. Just arm and disarm after you connect the power. If that doesn't work hold the valet switch and start the car.

blaksaga

Member - Posts: 13

Joined: March 18, 2003

Location: United States

Posted: March 18, 2003 at 4:02 PM / IP Logged

Thanks themagicone,

I guess you were right...I armed and disarmed and that loud as hell siren shut up. All is good now. My locks and everything are working, hooray! My 2 straight days of connecting wires wasn't a total loss. Thanks a lot man!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

It Wont Stop...plz help me...

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.