2006 escalade door locks

Home / the12volt's Install Bay / Car Security and Convenience / 2006 escalade door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Matrix7333

Copper - Posts: 54

Joined: October 15, 2003

Posted: January 31, 2009 at 12:04 PM / IP Logged

Hello all,

I am installing a alarm/remote start system in a 2006 escalade ext. I have one of the EZbusdata module which include the wires for the door lock. Do I still have to put a diode on these wires? If so, which side gets the band?

Thanks

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 31, 2009 at 1:14 PM / IP Logged

please note witch bypass model number it is. some are for passlock only and some are for doorlocks only and some are for both.

Matrix7333

Copper - Posts: 54

Joined: October 15, 2003

Posted: January 31, 2009 at 2:33 PM / IP Logged

xk01 with most recent firmware

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: January 31, 2009 at 5:00 PM / IP Logged

You do need diodes for the doorpins(each door trigger) but not the locks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 escalade door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.