the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring woofers


Post ReplyPost New Topic
< Prev Topic Next Topic >
oasisbuilder 
Member - Posts: 2
Member spacespace
Joined: February 01, 2009
Location: Louisiana, United States
Posted: February 01, 2009 at 8:13 AM / IP Logged  
I have a Kenwood kac-8104D class D mono power amp. 2ohm 500 watts ,4ohm 300 watts Iam trying to wirer 2 punch 4 ohm 8" dvc woofers 200 watts rms each woofer. The instruction manual dont show how to hook up 2 woofers so this is where i need help it shows 1 woofer being hooked up with 2 neg. feeds to the 2 neg.feeds on woofer and the same with the pos. feeds from the amp. Can i hook up two woofers to this amp? if so how? thanks for any help.
oasisbuilder 
Member - Posts: 2
Member spacespace
Joined: February 01, 2009
Location: Louisiana, United States
Posted: February 01, 2009 at 8:15 AM / IP Logged  
Model # of woofers are P2D28
i am an idiot 
Platinum - Posts: 13,543
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 01, 2009 at 9:01 AM / IP Logged  

If the speakers are dual 4 ohm drivers, the following diagram is the only safe way to connect those speakers to that amp. 

Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono
wiring woofers -- posted image.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 24, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer