02 lincoln ls, viper 5900

Home / the12volt's Install Bay / Car Security and Convenience / 02 lincoln ls, viper 5900 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

Leoayers

Copper - Posts: 73

Joined: October 23, 2002

Location: New Jersey, United States

Posted: February 17, 2009 at 5:05 PM / IP Logged

Would anyone be able to give me advice on how that would wired up I am installing a viper 5900 I've installed them before however never did the window roll roll up feature before. what wires to look for any relays needed, diode isolation etc... Thanks

Leoayers

Copper - Posts: 73

Joined: October 23, 2002

Location: New Jersey, United States

Posted: March 03, 2009 at 4:34 PM / IP Logged

Can someone supply me with the wiring info for remote start in a 2002 lincoln LS the remote start is a viper 5900 I also would like to control the windows rolling up and down using the remote. the windows can be controlled by the door lock cylinder and I would like to utilize that in some way. Any help including any diode isulation would be great. thanks for the help

james bond 007

Copper - Posts: 62

Joined: January 18, 2009

Location: Ontario, Canada

Posted: March 03, 2009 at 9:53 PM / IP Logged

12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	GRAY/BLACK (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	GREEN/ BLACK (+)	IGNITION SWITCH HARNESS
IGNITION 2	PINK/WHITE (+)	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	YELLOW (+)	IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 2	PINK / YELLOW (+)	IGNITION SWITCH HARNESS
KEYSENSE	N/A
PARKING LIGHTS ( - )	WHITE/ GREEN (-) See NOTE *1	@ HEADLIGHT SWITCH	25205_LS_LINCOLN LS PARKING LIGHT DIAGRAM.pdf
PARKING LIGHTS ( + )	DO NOT USE!
POWER LOCK	BLACK/ BLUE (TYPE B)	@ DDM Module, See NOTE *2
POWER UNLOCK	BLACK/ WHITE (TYPE B)	@ DDM Module, See NOTE *2
LOCK MOTOR WIRE	YELLOW/BLACK (+)	@ DDM Module, See NOTE *2
DOOR TRIGGER	BLACK/ WHITE (-)	@ UNDER DASH LIGHT
DOMELIGHT SUPERVISION	TURNS ON with UNLOCK
TRUNK RELEASE	WHITE (-), Requires Part #775 Relay	@ TRUNK RELEASE SWITCH
SLIDING POWER DOOR	N/A
HORN	BROWN / RED (-) See NOTE *4	@ FEM Module, See NOTE *3
TACH	BROWN or wire with BROWN STRIPE	@ MAIN HARNESS, PASSENGER FIREWALL
WAIT TO START LIGHT	N/A
BRAKE	ORANGE / YELLOW (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	DISARMS WITH UNLOCK
ANTI-THEFT	FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM	TRANSPONDER @ IGNITION SWITCH TUMBLER

NOTES

NOTE *1 the Parking Light Circuit will requires extra parts, a Relay part #775 and a (-)Negative thru a 1800 Ohm resistor, to connect, See DIAGRAM.

NOTE *2 the DDM (Drivers Door Module) is located in the Center of the DRIVERS DOOR.

NOTE *3 the FEM (Front Electronic Module) is located in the DRIVERS KICK PANEL,

NOTE *4 the HORN wire can also be found at the Steering Column it is a ORANGE / YELLOW (-)

Haven't done the windows on this car before, maybe someone on here has done them before that could help

Search for other posts by james bond 007

Leoayers

Copper - Posts: 73

Joined: October 23, 2002

Location: New Jersey, United States

Posted: March 04, 2009 at 7:46 AM / IP Logged

Thanks for the help, Quick question though what is the type b under power door locks?

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 04, 2009 at 2:51 PM / IP Logged

It's GROUND pulse activation.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

xicano21

Member - Posts: 32

Joined: November 27, 2008

Posted: March 04, 2009 at 10:53 PM / IP Logged

extend the pulse to make the windows go up

Leoayers

Copper - Posts: 73

Joined: October 23, 2002

Location: New Jersey, United States

Posted: March 07, 2009 at 5:12 PM / IP Logged

I am installing a viper remote start 5900 and I am trying to figure out the best place to hook up the 3 red power wires on the Satelite relay pack. Is it safe to wire them to red wires on the ignition switch? It is going into a 02 linc. LS. Any help would be apprciated

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 07, 2009 at 5:54 PM / IP Logged

Considering that what those wires power, I would imagine so.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Leoayers

Copper - Posts: 73

Joined: October 23, 2002

Location: New Jersey, United States

Posted: March 07, 2009 at 6:06 PM / IP Logged

I thought the red wires on the satelite receive power that goes out over the other wires the manual states they r 12v input wires

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: March 08, 2009 at 1:32 PM / IP Logged

you can connect them to the power wires at the ignition switch, they will work fine, although in my personal experience, when using voltage sense, with the climate controls maxed and all accesories on sometimes you may encounter intermittent shutoffs, so i normally run three 10 gauge wires fused at the battery to supply the relay,of u can just use tach, either or.

commit your way to jehovah and he will act in your behalf. psalms 37:5

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.