disabling shock sensor whilst car is goin

Home / the12volt's Install Bay / Relays / disabling shock sensor whilst car is goin (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

_deagle_

Member - Posts: 6

Joined: February 18, 2009

Location: New Zealand

Posted: February 20, 2009 at 12:05 AM / IP Logged

Hi there. Just to confirm, would this setup be correct to disable shock sensor whilst turbo timer is still going?

85 - ignition signal from turbo timer

86 - ground

30 from 12V+ from shock sensor

87a to 12V+ shock sensor

Whilst turbo timer is going, it will energize the coil which means there will not be a 12V+ source to power the shock sensor, once the turbo timer is off, it will click back to 87a (12V+) and shock sensor will receive power again.

Cheers.

'00 Subaru B4 Legacy RSK

Back to Top

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: February 20, 2009 at 1:06 AM / IP Logged

yes

Back to Top

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: February 20, 2009 at 9:24 AM / IP Logged

Or you can connect the ground of the shock to ignition out of your remote starter. This works most of the time but you'll have to test it in your installation.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

disabling shock sensor whilst car is goin

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.