the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

noob, viper 5701, 1995 acura integra


Post ReplyPost New Topic
< Prev Topic Next Topic >
bartman201 
Member - Posts: 5
Member spacespace
Joined: February 23, 2009
Location: Delaware, United States
Posted: February 23, 2009 at 9:11 PM / IP Logged  
I'm new at this. i just installed a viper 5701 on my 1995 Acura Integra. everything works fine. the only problem that i have is that damn alarm will not arm it self, i tried the system feature change but it wont take.
how can i change the options on the alarm, can someone give instructions on how to do it step by step. thanks.
bartman201 
Member - Posts: 5
Member spacespace
Joined: February 23, 2009
Location: Delaware, United States
Posted: February 23, 2009 at 9:56 PM / IP Logged  
this is what i tried :
1. Open a door. (The GREEN wire, H1/8, or the VIOLET,
H1/6 must be connected.)
2. Ignition. Turn the ignition on, then off. (The heavy
gauge PINK wire must be connected.)
3. Select a Menu. Press and HOLD the Valet/Program
switch. (The Valet/Program switch must be plugged into the blue port.) After
three seconds the siren will chirp once indicating entry to the Basic Features
Menu. If this is the menu you want, release the button and go on to Step Step 4.
4. Select a Feature. Press and release the Valet/Program
switch the number of times corresponding to the feature
you wish to change.
5. Program the Feature. While holding the Valet/Program
switch, you can toggle the feature on and off using the
remote control. Pressing the button that arms the system will select the one chirp or default setting. Pressing the button that disarms the system will select the two chirp setting.
this is where i get lost i need to go to 3 chirp how the hell do i do that?
SoundImage 
Copper - Posts: 75
Copper spacespace
Joined: June 18, 2003
Location: United States
Posted: February 23, 2009 at 9:57 PM / IP Logged  

doucle check your dooe trigger connection, the alarm wil not auto arm until 30 sec. after the door signal is lost.  i believe feature 1-1 is passive arm

bartman201 
Member - Posts: 5
Member spacespace
Joined: February 23, 2009
Location: Delaware, United States
Posted: February 23, 2009 at 11:03 PM / IP Logged  
door trig works. im looking for the option that arms it self and lock the car is that 1-1 or 1-3 and if it is 1-3 how do i get to it?
this is what the Install Guide said:
1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is used. When set to passive the system will arm automatically 30 seconds after the last door is closed. To alert the consumer of passive arming, the siren will chirp 20 seconds after the door is closed. This provides the consumer with an audible warning prior to the system actually arming. At the 30 second mark the system will arm but the siren will not chirp.
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: February 24, 2009 at 7:27 AM / IP Logged  
you may be in the wrong menu, why would you need to go to three chirps, when there are only two options, passive and active arming,
commit your way to jehovah and he will act in your behalf. psalms 37:5
bartman201 
Member - Posts: 5
Member spacespace
Joined: February 23, 2009
Location: Delaware, United States
Posted: February 24, 2009 at 9:57 AM / IP Logged  
according to the install guide there's 5 i need option 3 passive arm with lock
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: February 24, 2009 at 2:35 PM / IP Logged  
my bad. sorry
commit your way to jehovah and he will act in your behalf. psalms 37:5
bartman201 
Member - Posts: 5
Member spacespace
Joined: February 23, 2009
Location: Delaware, United States
Posted: February 24, 2009 at 8:12 PM / IP Logged  
so how do i get option 3?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer