the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1996 ford taurus radio


Post ReplyPost New Topic
< Prev Topic Next Topic >
tornactive 
Member - Posts: 3
Member spacespace
Joined: February 28, 2009
Location: Pennsylvania, United States
Posted: February 28, 2009 at 5:50 PM / IP Logged  
Hello everyone, I'm writing today to ask for some help on a question that no one can give a clear answer to. This is my first radio install and post at 12volt so go easy on me if its an easy answer. Here it goes : I purchased a Scosche FD134030B kit from .....com ( Dash Kit) w/ a wiring harness, after figuring out I had to run the harness from the trunk to my headunit area I did so and have all my climate controls hooked up and everything. Now the thing I cant figure out is how to get power to my headunit and the climate control lights and defroster etc. I've seen a few diagrams but there are no wires of this color in my cars harness connected to the old radio. Did I miss something am I missing another harness ?
If anyone is familiar with this install please post step-by-step how power is achieved thank you !
tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: March 01, 2009 at 5:41 PM / IP Logged  
You are missing the second harness. It provides power to the HU and HAVAC controls.
There is no such thing as free installation!
tornactive 
Member - Posts: 3
Member spacespace
Joined: February 28, 2009
Location: Pennsylvania, United States
Posted: March 01, 2009 at 7:24 PM / IP Logged  
Yea I just found the second harness at Amazon.com I guess they really dont send you the "complete kit" I thought I had got something good from a company for once guess not. Well since finding this out, I found a really good diagram from Crutchfield.com - Click here for the Diagaram if anyone has a Taurus project they need this on. I just used the diagram as a reference and cut the factory harness it was pretty easy from there you only have to cut about 5-6 wires. If anyone needs help with their taurus install cutting the factory harness please just ask I'd be glad to help. Only thing I can say is that I bought that Scosche kit and only thing not good is the trim for the HU part doesnt seem to fit very well might need some modding. Thanks for your help !

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 12, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer